Free shipping to most Metro areas. Regional areas may incur additional shipping charges; please see shipping policy for more information.

Bash Plates to Suit – LandCruiser 80 Series

$199.00$549.00 Inc. Gst

Suits: Toyota’s

Suits Model/Series: LandCruiser 80 Series

Important: If you have an Auto conversion from a Manual please choose the manual plate as far as we know the transfer case cross member has not been moved

Made in 4mm Stainless, this Product is a completely new design. New Bolts Supplied.

 

Calulate Shipping Cost

SKU: 40007-11111 Categories: , , Tags: ,

Description

Our Custom Offroad designed and Australian made bash plates has been designed to use the existing holes that the standard plates bolts to and to work with all Bull Bars. Made from 4mm Stainless Steel they give the protection to take the full force of the Cruiser

  • Suitable for the 80 Series
  • Available in 4mm & 3mm Stainless Steel, the perfect thickness of weight to strength ratio.
  • Australian Made, all our plates are made right here in Brisbane!
  • Slim Design for maximum clearance, no modifications and only 5 mins to fit.
  • New Bolts Supplied!.
  • Specials, deals and competitions are posted on our Facebook page. Search ‘Custom Offroad Accessories’

Additional information

WeightN/A
Plate Selection

Auto Transfer Plate, Engine guard, Engine Guard and Manual Trans Plate, Manual Transfer Plate, Radiator and Auto Transfer Plate, Radiator and Engine Guard 2 piece, Radiator and Manual Transfer Plate, Radiator Guard, Radiator, Engine Guard and Auto Transfer Plate, Radiator, Engine Guard and Manual Transfer Plate

5 reviews for Bash Plates to Suit – LandCruiser 80 Series

  1. Andrew Verroen (verified owner)

    Awesome, the bash plates i have looked at are garbage, they use brackets to hold the bash plate to the chassis, and hang down like tits on a bull, your bash plate is up high and fits in real good and best of all it is one piece, love the product keep up the good work and thanks again for a awesome strong product.

  2. John (verified owner)

    Looks good, easy to fit to existing chassis bolts and very functional, only downside is that it could have come forward a bit further to my ARB Bullbar. More importantly it is built tough.

  3. Ben (verified owner)

    Great product, easy to fit, looks great 🙂

  4. Chris Bednall (verified owner)

    Unbelievable product very strong and looks great, highly recommend. Only problem had to modify trans cover slightly suit legendex side steps.

  5. Domenic Panizza (verified owner)

    Fantastic plates, easy fitment. Looks incredible. Cheers

Add a review

Your email address will not be published. Required fields are marked *

  • Many enthusiasts consider the thicker the plate the better! This is true to a point but what some “experts” don’t consider is when your plates sustain a hit the pressure and shock has to be absorbed somewhere. If the plate has no flex what so ever the shock is then put back into the mounts which are welded to your chassis. It is much easier and cheaper to replace bash plates after a few years rather than repairing your mounts or chassis!

    We offer a range of thicknesses based on your preference, vehicle and type of 4 wheel driving. With plates ranging from 3mm to 4mm for the more common dual cabs through to 4mm standard for heavier vehicles.

  • After countless 4wd trips the one thing I kept replacing the most was my underbody protection. Although they did get a good beating the main problem was the rust factor, especially from my love of beach driving.

    My car would look great all polished and washed except for underneath that was bent out of shape and covered with surface rust. I designed a set out of stainless steel because of the resistance to corrosion and the strength to get a better, more durable life out of my bash plates.

    The stainless steel comes in a 2b matte grey finish which holds up great against scratching and with the extra strength of the stainless I’ve tried my best to knock them out of shape with no success. If you are after a bash plate that you would like to put on and not have to change every 6 months stainless is the way to go.

  • Built using qulaity stainless steel, our Bash Plates provide the perfect weight to strength ratio for your 4×4. As each Make and Model is different so too is the weight of each plate. However, as a general rule, a 3 piece set of 3mm thickness, usually weighs between 24kg & 30kg, while a 3 piece set of 4mm thickness, usually weighs between 35kg & 40kg.

    Please consult the product page of the vehicle you’re interested in for an accurate weight for those Bash Plates.

  • Our aim is to consistently maintain our stock levels so that we can get our plates to you as soon as poosible. However, in the event your plate is unavailable, the turnaround is generally between 1 to 2 weeks. This timeframe is well below the industry average as our plates are made right here in Brisbane, Australia!

  • Our plates are designed to fit with a large range of bull bar setups. If your 4WD currently retains the factory plates, and has a bull bar installed, then our plates will fit. The majority of our bash plates support a diff drop, however, we advise you consult the individual product pages for more information regarding the make and model of the 4WD you wish to fit plates to.

  • In a market saturated with an endless list of must have upgrades for your 4×4 often underbody protection is overlooked. Vehicle manufactures do not consider bash plates essential to the performance of the car even though they are producing cars for offroad use.

    Over the years, the market has seen a shift away from the older live axle cars to the more comfortable riding independent front suspension “IFS”. Whilst making the car more pleasant to drive this means vital components such as the radiator, sump, diff actuator and transfer case become more vulnerable.

    Vehicle owners are often unaware or reluctant to invest in bash plates as they consider their offroading to be tame or “only beach use”. Some of the worst damage we have seen to the underside of cars has been sustained on the beach navigating a cutting or hitting a washout at speed. Often the damage will render the car un-driveable with split radiators or damaged actuators making the car 2wd.

    Bash plates should be one of the first modifications carried out before heading offroad. The damage that can occur, the cost of recovery and repairs vs the purchase price is a simple equation.

[]