Description
About The Bash Plates
Our Custom Offroad designed and made Triton bash plates will fit all new models from 2015. The plates have been designed to use the existing holes that the standard plates bolts to and to work with all Bull Bars.
- Plates are supplied with Car Wording, “Custom Offroad” or just vents
- Transmission Plate follows on from the Diff Plate
- Available in 3mm Mild Steel, 3mm & 4mm Stainless Steel. 3mm Mild Steel comes raw unpainted.
- Australian Made, all our plates are made right here in Brisbane!
- 3 piece Front, Diff/Sump and Transmission Guard Combo
- Replace the 1.5mm standard tin plates.
- Slim Design for maximum clearance, no modifications and only 25 mins to fit.
- We recommend using the standard bolts as the high Tensile put to much pressure on the mounts.
- Does not fit with a Diff Drop, this vehicle does not need a diff drop. I own one I know
- Specials, deals and competitions are posted on our Facebook page. Search “Custom Offroad Accessories”
Not sure which material and thickness to choose?
Mild steel is great for short term usage 6 to 12 months. After various knocks, Mild steel starts to crack and rust over time. Stainless Steel is a far superior metal that endures a lot more hits and beach driving. The most popular setup is 3mm stainless, these plates great for general 4wding, will last you for years and give you peace of mind. If you like to go a bit more rugged in your driving and want the extra strength then the 4mm stainless is for you.
David Moore (verified owner) –
Recently returned from a 10-day trip on Fraser Island and have to say i am so glad i had these bash plates fitted. They took quite a beating, with many hard impacts to them against sand dunes etc, as we navigated over difficult terrain around the island and not a dent to be seen. They have probably saved me $1000s in repair bills.
Mark Jeffrey (verified owner) –
I purchased the full 3mm stainless set for my MR triton, and Coloured RED. Those plates took approx. 12 minutes to fit, drove up the car ramps, braked, mate and I slid under and like wow, job done, and look great. Thanks to all the staff for a quality product and free postage to S.A.
Mark Jeffrey (verified owner) –
I purchased the full 3mm stainless set for my MR triton, and Coloured RED. Those plates took approx 12 minutes to fit, drove up the car ramps, braked, mate and I slid under and like wow, job done, and look great. Thanks to all the staff for a quality product and free postage to S.A.
Steven Atkinson (NSW) –
Order #11733. Beautiful, got the 3mm stainless 3 piece (from C.O.A) for MQ Triton. They look great, really happy with the product, service (advice) & price. Took me about 1 1/2 hours as I had no hoist or ramps ! I think the hardest bit was peeling off the plastic !
Paul Hayes (verified owner) –
Absolutely love em …We got 4mm stainless 3 piece for our MR Triton they look awesome and fitting was a breeze lol 😂 Paid them $50 cash job done ✅
Alex (verified owner) –
Fits up easily and everything lines up on my MR triton. Fits with standard front bumper with no problems. Really good quality, the stainless is the only easy to go. Remove the plastic film before starting the install.
Rohan Mckitrick (verified owner) –
Great product and even better customer service, couldn’t ask for better value for money. After a hiccup with the original order I had the correct items within a couple of days and even had a phone call from Simon to make sure everything was right. Thanks again.
TERRY (verified owner) –
Excellent product at great price!
Jamie (verified owner) –
great customer service. rang me regarding my enquiry on a public holiday to answer my questions. then advised on the best product for my car.
I purchased the same day. received an email after holidays to advise they were making the plates, then shipped them in a couple days. and fit was awesome.
look great.
Sandy (verified owner) –
Great product.
Amazing service, left it to the last minute, told the guys we needed it quick, we ordered Friday & received Monday!
So happy! Thanks Heaps 🙂
Matt (verified owner) –
4mm Stainless 3pce to suit MQ Triton.
Fitup was easy, everything lined up perfect! I did have to put a small cut along 2 washers to flatten one side to suit the transmission guard plate fold.
I have also fit a Supieror Engineering “diff drop” bracket in since and the guards still fit! Bit tight, but there is still daylight between diff and guard.
Great product! Has already taken a few little hits and holds up mint.
Howard (Geezer x) (verified owner) –
I ordered the 3mm steel three piece for the tritonMR, I got the front plate painted. It took a little longer than I thought because the team had Covid and the plate had to be painted, but I was kept fully informed throughout. It’s an awesome product and really finishes the front off. Would recommend the product and the team at COR without hesitation.
Jason (verified owner) –
Ordered the 3 piece stainless for MQ Triton, once you find the starting point, the rest of the install was easy. Got mine painted red, looks amazing on a black body.
Luke (verified owner) –
Perfect fit and easy install. Very fast delivery
Armand (verified owner) –
Makes the Triton look even better. Perfect fit!
Will be ordering the third plate soon.
Matthew (verified owner) –
I ordered the 3 piece 3mm Stainless Steel Bash Plates for my MR Triton. Awesome product and was delivered within the week.
They were easy to fit and customer service is above and beyond amazing.
Highly recommended.
Marc (verified owner) –
Fast delivery and simple to install. Very happy with purchase.
Trent M (verified owner) –
Received and fitted my 3 piece stainless steel bashplate to my MR Triton.
Solid product, looks good and dead easy to fit.
Great value for money as well.
Allan Spears (verified owner) –
Perfect
Dave (verified owner) –
Awesome addition to the Triton, easy to fit, looks great and has given me more confidence off road. The Triton logo really completes the front end looks. Very happy!
Adriel (verified owner) –
Excellent quality with swift delivery. Hit the plates with a quick spray and bolted straight on. If you are in need of new high quality bash plates, look no further.
Joel (verified owner) –
Great product got the 2 piece 3mm for my MQ. Easy to install and far superior to the standard aluminium foil. Already had a bump or 2 and no damage unlike the original which bent straight away. Could recommend more highly
Matt (verified owner) –
Got these for my MR Triton and I must say top quality product.
Easy fitting and all bolts up to genuine mounts. All plates fit together perfectly.
Strongly recommend if you go bush and want that piece of mind that your engine sump and gearbox/transmission will be protected. Definitely worth the money 🤙🏽
Garry Davis (verified owner) –
Got the full 3mm stainless set for MR triton. Real easy to fit and look the part. Confident now for the trip out west. Thanks to all the staff for a quality product.
Brad B (verified owner) –
‘Great product. Absolutely great service. Purchased the 3 piece 3mm Stainless steel plates for my partners MQ. The plates fit with ease and looked amazing. Highly recommended’