Description
Our Custom Offroad designed underbody protection bash plates will fit all new models from 2015 to 2022. The plates have been designed to replace the front factory plate and cover underneath the motor from the cross member the factory front plate finishes to the the next cross member towards the rear of the vehicle. We always recommend buying the 3 piece set but unfortunately some Bull Bars remove the front plate top mounting brackets.
*Before you purchase a Bull Bar check it does not remove the front plate top mounting brackets!!
- Plates are supplied with “NP300” cut out or Custom Offroad.
- Available in 3mm Mild Steel, 3mm Stainless Steel. 3mm Mild Steel comes raw unpainted.
- Australian Made, all our plates are made right here in Brisbane!
- 3 piece Front, Diff/Sump and Transmission Guard Combo
- Replace the 1.5mm standard tin plates.
- Slim Design for maximum clearance, no modifications and only 5 mins to fit.
- We recommend using the standard bolts as the high Tensile put to much pressure on the mounts.
- Does not fit with a Diff Drop, if you are in Brisbane with a Diff Drop please contact us and we can make the modifications.
- Specials, deals and competitions are posted on our Facebook page. Search ‘Custom Offroad Accessories’
Not sure which material choose?
Mild steel is great for short term usage 6 to 12 months. After various knocks Mild steel start to crack and rust over time. Stainless Steel is a far superior metal that endure a lot more hits and beach driving. The most popular setup is 3mm stainless, these plates are great for general 4wding, will last you for years and give you piece of mind.
Fitting Instructions
Thank you for your purchase of the Np300 Bash Plates.
If you have purchased the Mild Steel plates, they need to be painted before fitting. If you have
purchased the Stainless Steel plates, make sure the plates fit before removing the protective film. If
your plates don’t fit or have any other problem, the protective film needs to stay in tacked in order
to receive a replacement set or a refund.
Please note there is a slight difference between Series 1,2 compared to 3,4. This difference is in the
cross member where the front and sump plate meet. The vehicle comes standard with only a front
plate, so it will be at the back of the front plate. There is 4 holes in the chassis, 2 x M6 bolt threads
and 2 x M8 bolt threads. In the series 3,4 Nissan has removed the M8 bolt threads leaving only the
M6 threads. This will not be strong enough to hold two bash plates that overlap. It is strongly
recommended to get M8 nurtserts in the chassis. This is like a pop rivet with a thread in the middle.
Front and Sump Plates
Start with the sump plate. This will go directly under the motor with the forks to the front. Line up
the front holes and use 2 x M6 bolts and 2x M8 bolts. The back of the plate will use the 2 outer
20mm holes. The 2 Spacers will go in between the plate and the cross member to fill the void. The 2
x M10 75mm bolts will go through the cross member and tighten with the nylon lock nut. The 4 back
holes are for the transmission plate to Bolt too. The front plate is simply using the bolts of the front
of the sump plate so the plates over lap and then bolting up the front holes. Front bolts may vary in
size due to different bull bars, factory mounts use M6 bolts.
Transmission Plate
The transmission plate will bolt to the sump plate using 4 x M10 20mm bolts and nylon lock nuts. It
then will use 2 x M10 75mm bolts to bolt through the transfer case cross member, similar to the
back of the front plate.
Thank You for your purchase
Download Fitting Instructions
Marco (verified owner) –
Great product. Looks and feels great! Awesome customer service and straight forward and easy to fit yourself. Cheers
Jason (verified owner) –
Good bit of kit , easy to fit and covers everything I need .
Ray (verified owner) –
Fitted the 3″ 3 peace stainless steel plates to my Nissan d23, it could not have been any easier. It looks soild & looks great. I feel more confident when I go out on the beaten tracks now.
The service from these guy were great.👌😎
Stuart (verified owner) –
Recently fitted the stainless bash plates to my 2019 Ntrek.Fitting them was easy and quick.Look good and obviously provides heaps better protection for the intercooler etc than the original bit of flimsy tin.
Customer service was good also. They gave me a quick call just to verify everything I ordered online was right and courier delivery was as requested…
Have no problem recommending them
John (verified owner) –
Love the bashplates and the service given the team. Being all thumbs I had trouble fitting them. The boys said come over and we will give you a hand and didn’t with ease.
Great customer service
adrian (verified owner) –
Very easy to deal with & speak to, awesome product
Shane (verified owner) –
Great product and service. Got my bash plate painted and couldn’t be happier. So easy to fit.
Kevin White (verified owner) –
Bought the complete set for my 2015 STX, had some minor issues getting them to align as I was installing them solo, following the clear instructions helped immensely. Great product, nil issues and would recommend for your own vehicle. Provides peace of mind whenever you choose to go off road, even just that one time…
Peter Francis (verified owner) –
Great product which fitted perfectly. All bolt holes aligned which was unlike the other rubbish brand I purchased. Their plates had to be levered to align the holes & the first sand dune I hit bent the plates.
Finish was excellent & all laser cut edges were clean with no sharp edges.
Dave (verified owner) –
Fitted the front and sump protection plates to my 2015 NP300 with XROX bar, with little problems. Look great and seem to give great protection.
Neal Carmont (verified owner) –
I’m lovin my bash plates purchase easy install via UTube Vid needed a nav vid but easy none the less glad I found your stall at the last 4X4 show in brisbane
Brodi Mundey (verified owner) –
Awesome bit of gear. Easy to fit once you wrap your head around where the bolts go. Fit straight up to my arb bullbar. No issues at all, love it
Heath (verified owner) –
Product is great and service was as it should be. I sent a few questions about installation and they were answered same day. Unlike some other 4wd accessory retailers who apparently don’t care about your question once you have bought the product.
Ian Goldney (verified owner) –
I fitted a 3 piece 3mm stainless steel set of bash plates to my 2021 facelift Navara. The fit and finish of these plates is superb and looks very neat and solid once installed. Very pleased with the result and feel confident that they’ll provide more protection than I’ll ever need! Highly recommended.
Barack Borkman –
Got a bash plate for my NP300. Saved me countless times up Fraser. Still managed to give it a little bend, but my intercooler is still intact where as it would have been ripped out with the stock bash plate. Very happy with it. Also Simon was great help. Had a couple install questions and he was very helpful