Free shipping to most Metro areas. Regional areas may incur additional shipping charges; please see shipping policy for more information.

Bash Plate Combos for Isuzu MU-X 2012 – 2021

(9 customer reviews)
$289.00$729.00 Inc. Gst
Suitable for Isuzu MU-X 2012 – 2021; 2 & 3 Piece Underbody Protection – Bash Plate Set

*Fits with or with out a bull bar if the factory plate still fits

Fitting: From $50 at Sumner Park (fitting is paid on the day of fit up)

3mm 2 piece Stainless Steel: $429.00      16kg

3mm 3 Piece Stainless Steel: $699.00      25kg

DIFF DROP INFO: Our diff drop plates fit with crossmember replacement Diff Drops: Road Safe, Superior, All Terrain, PSR ect.

Munji diff drops just use the standard plates.

New bolts supplied, fits with out a Bull Bar

This Product is designed and manufactured by Custom Offroad Accessories Pty Ltd

Calulate Shipping Cost

SKU: 10070-1
Category: , ,
Tags: ,


Our Custom Offroad bash plates will fit all models in the MU-X range. The plates have been designed to use the existing holes that the standard plates bolts to and to work with all Bull Bars.

  • Plates are supplied with M-UX, Custom Offroad  or  Vents.
  • Available in  3mm Stainless Steel for the best protection possible.
  • Australian Made, all our plates are made right here in Brisbane!
  • 2 or 3 Piece Factory Replacement
  • 3 piece Front, Diff/Sump transmission Combo
  • Replace the 1.5mm standard tin plates.
  • Slim Design for maximum clearance, no modifications and only 5 mins to fit.
  • New Bolts Supplied
  • Tested with all Diff drops
  • Specials, deals and competitions are posted on our Facebook page. Search ‘Custom Offroad Accessories’


Fitting Instructions

Additional information

Plate Selection

3 piece Kit Front to Transmission Sump, 2 Piece Kit Front and Sump, Transmission Plate Only


3mm, 4mm


Stainless Steel


24 kg

Front Plate Options

Not Applicable, Custom Offroad, M-ux Logo, Vented

Diff Drop

No I dont have one, Yes I have a Diff Drop

4mm Sump Upgrade

No, Not applicable, Yes

Do You Have Recovery Points?

Roadsafe, Factory, MCC, Arb, Ironman, TJM

9 reviews for Bash Plate Combos for Isuzu MU-X 2012 – 2021

  1. Peter Todd (verified owner)

    Great products and looks the part and quick service. Easy to put on once you take the old ones off first. Highly recommended

  2. Michael (verified owner)

    Awesome product, fantastic service and delivery. So easy and simple to install and looks great, highly recommended. 👌

  3. Steve (verified owner)

    Tested these plates in a off road environment very happy with the result.

  4. Scott (verified owner)

    Excellent product and easy to fit. Was going to get them painted black but happy I didn’t as the contrast of stainless and the under body of the car looks good. Really liking the MUX cut out on the front plate

  5. Tash (verified owner)

    Extremely happy with new Bash Plates for my Mu-x. Love the new look and especially being able to get them painted orange! Highly recommend the product and have done so already to fellow off roaders. The prompt delivery and install was professional.

  6. Steve (verified owner)

    The service was exceptional, was delivered to me well ahead of when I thought so close to Christmas. Extremely happy with the product too, looks great and was so easy to install myself.

  7. Tegan (verified owner)

    Was so easy to fit up. Didn’t take too much effort or time. They look fantastic and are of good quality. 2 bolts supplied for the diff plate didn’t fit but just used the old original ones.

  8. Brenden McLean (verified owner)

    Brilliant product. Very easy to fit with all hardware and instructions easy to follow.

  9. Ben (verified owner)

    Excellent product, extremely well manufactured. My mu-x has a diff drop and the bash plate kit to suit fitted perfectly and was easy to install. All hardware was supplied. I even powder coated the front plate red to make it stand out. Very happy thankyou.

Add a review

Your email address will not be published. Required fields are marked *

Is it in stock?

Our aim is to consistently maintain our stock levels so that we can get our plates to you as soon as poosible. However, in the event your plate is unavailable, the turnaround is generally between 1 to 2 weeks. This timeframe is well below the industry average as our plates are made right here in Brisbane, Australia!

What is a Diff Drop?

A diff drop is a modification that physically lowers your diff away from the chassis in order to bring the CV angles back into alignment and closer to the factory specifications. Ultimately, the reason for considering a diff drop is to minimise the CV shaft angle that is increased by the addition of a suspension lift. As a general rule, if you have lifted your suspension by at least 2 inches then you should consider dropping the diff!

Does it fit with my brand of Diff Drop/Bull Bar?

Our plates are designed to fit with a large range of bull bar setups. If your 4WD currently retains the factory plates, and has a bull bar installed, then our plates will fit. The majority of our bash plates support a diff drop, however, we advise you consult the individual product pages for more information regarding the make and model of the 4WD you wish to fit plates to.

Why do I need to upgrade my underbody protection plates?

In a market saturated with an endless list of must have upgrades for your 4×4 often underbody protection is overlooked. Vehicle manufactures do not consider bash plates essential to the performance of the car even though they are producing cars for offroad use.

Over the years, the market has seen a shift away from the older live axle cars to the more comfortable riding independent front suspension “IFS”. Whilst making the car more pleasant to drive this means vital components such as the radiator, sump, diff actuator and transfer case become more vulnerable.

Vehicle owners are often unaware or reluctant to invest in bash plates as they consider their offroading to be tame or “only beach use”. Some of the worst damage we have seen to the underside of cars has been sustained on the beach navigating a cutting or hitting a washout at speed. Often the damage will render the car un-driveable with split radiators or damaged actuators making the car 2wd.

Bash plates should be one of the first modifications carried out before heading offroad. The damage that can occur, the cost of recovery and repairs vs the purchase price is a simple equation.

What thickness do I need?

Many enthusiasts consider the thicker the plate the better! This is true to a point but what some “experts” don’t consider is when your plates sustain a hit the pressure and shock has to be absorbed somewhere. If the plate has no flex what so ever the shock is then put back into the mounts which are welded to your chassis. It is much easier and cheaper to replace bash plates after a few years rather than repairing your mounts or chassis!

We offer a range of thicknesses based on your preference, vehicle and type of 4 wheel driving. With plates ranging from 3mm to 4mm for the more common dual cabs through to 4mm standard for heavier vehicles.

Stainless or Mild Steel?

After countless 4wd trips the one thing I kept replacing the most was my underbody protection. Although they did get a good beating the main problem was the rust factor, especially from my love of beach driving.

My car would look great all polished and washed except for underneath that was bent out of shape and covered with surface rust. I designed a set out of stainless steel because of the resistance to corrosion and the strength to get a better, more durable life out of my bash plates.

The stainless steel comes in a 2b matte grey finish which holds up great against scratching and with the extra strength of the stainless I’ve tried my best to knock them out of shape with no success. If you are after a bash plate that you would like to put on and not have to change every 6 months stainless is the way to go.

What is the Weight of the Plates?

Built using qulaity stainless steel, our Bash Plates provide the perfect weight to strength ratio for your 4×4. As each Make and Model is different so too is the weight of each plate. However, as a general rule, a 3 piece set of 3mm thickness, usually weighs between 24kg & 30kg, while a 3 piece set of 4mm thickness, usually weighs between 35kg & 40kg.

Please consult the product page of the vehicle you’re interested in for an accurate weight for those Bash Plates.

If you have any questions, please get in contact.